AHTUBA NPO, CJSV was established in 2005 and has been producing and supplying equipment and spare parts for the industrial chemical, petrochemical, engineering , machinery, steel and non-ferrous industries:
Reactionary centrifugally cast tubes for steam reforming plants;
Reactionary centrifugally cast tubes for pyrolysis furnaces;
Centrifugally cast tubes for furnaces super heater;
Radiant tubes and cast rolls for heating furnaces (through type furnaces with roll’s hearth, tempered furnaces, normalizing furnaces, annealing furnaces) as well as for galvanizing, pickling lines ( sink rolls, stabilizer rolls, squeeze rolls) as well as rolls for run-out tables and continuous casting machines;
The company's specialists have mastered and successfully applied the technology of centrifugal casting billets made of special heat-resistant, corrosion-resistant steels and alloys with diameters from 66 mm to 616 mm and a wall thickness of 7mm to 100mm, and production equipment on its basis.
Aktobe Rail and Section Works LLP is a unique enterprise which produces differentially heat-strengthened rails of high quality and it is the sole producer of medium sections in Kazakhstan. The annual designed capacity of the rolling plant is 430 thousand tons of finished products including 200 thousand tons of P65 rails (ST RK 2432-2013 and GOST P51685-2013) and 230 thousand tons of sections:
- Hot-rolled steel channelsl: 16Y [160x64] - 30Y [300x100] GOST 8240-97, GOST 535-2005, GOST 19281-89;
- Hot-rolled steel equal angles: 10 [100x7] - 20 [200x25] GOST 8509-93, GOST 535-2005, GOST 19281-89;
- Hot-rolled steel flange beams: 14 [140x73] - 30 [300x135] GOST 8239-89, GOST 535-2005, GOST 19281-89.
High quality products are guaranteed by the rolling mill supplied by world-known company Primetals Technologies Italy S.r.l. (Siemens VAI). Currently our comapany collects orders from large industrial and steel trading companies of Kazakhstan and the near-abroad countries to generate the package of orders proceeding from preferences of potential partners. By analyzing and taking into account all the needs of our partners, we wiil make a schedule of rolled metal production for 2017-2018.
AM supplies all kinds of aluminum semi-finished products for various industries, including tapes for the production of composite panels and other construction and finishing materials. The company specializes in the blank production such products like: plate processing, rods, ring forgings, billets manufacturing rings, flanges of all types of metals with RT-Techpriemka and Ultrasonic Testing (UST) using modern equipment.
VILS is a strategic enterprise in the field of creation of new technologies and production of metallurgical products from special alloys. (VILS) Institute has closed metallurgical production cycle, integrated with the test and research base. In the innovative portfolio of the Institute there are 101 patents. All manufactured products is almost unique, high-Tech and requires constant scientific support.
Aluminium International Today published by Quartz Business Media (UK) is an English language journal circulating 6000 copies worldwide to producers and processors of aluminium. It contains technical articles, conference reports, market analysis, regional reports, news and statistics. In addition to publishing six issues a year it also publishes two Russian language editions and two Chinese a year and an annual directory of suppliers. If you would like to be kept informed with industry news, then remember you can visit the website: www.aluminiumtoday.com as this is updated daily with news and information. For subscribers, a pdf version is available on request in addition to the printed version. We also offer readers the opportunity to receive a free weekly newsletter. If you already receive our weekly newsletter, then you will automatically receive a free digital English language issue upon publication. However, if you don’t, then you can easily sign up through the website: www.aluminiumtoday.com/enewsletter
Manufacture of highly precise dimension thin-walled building aluminum profiles of 6060; 6063 alloy, and coating with polymeric powder of any color using RAL scale catalog.
- Complex profiles NEW-TEC, PROVEDAL;
- Trade and exhibition profiles;
- Floors profiles;
- Profiles for advertising constructions;
- Cornice profiles;
- Profiles for window screen - Standard (corner, tube, brand, channel, plate, double-T);
- Profiles of any complexity and configuration according to Customer’s drawings.
The plant’s development strategy is focused on providing quality services to the Customers, extending the range of products and services, meeting the Customer needs and expectations.
AMR, JSC is the largest diversified modern enterprise of southern Russia on production of aluminium semi-finished products for aircraft, automotive, shipbuilding, instrument making, electronic and other branches of industry.
ArcelorMittal is the world's leading steel and mining company, with a presence in 60 countries and employs around 210 000 employees worldwide. Guided by a philosophy to produce safe, sustainable steel, we are the leading supplier of quality steel in the major global steel markets including automotive, construction, household appliances and packaging, with world-class research and development and outstanding distribution networks.
Our products are:
- Entire range of specialized CNC grinding, notching and turning lathe machines for rolling mill roll maintenance shop;
- Diamond wheels, TC and PCD tools, as well tool grinders for tools reconditioning;
- TC rolls and steel rolls for tube, hot and cold rolling mills;
- Titanium carbide guide rollers.
Founded in 1941, today AZTM is the leading machine-building plant in Kazakhstan with its unique technologies and specialists. We focus on our clients' real needs and offer them efficient and practical solutions that combine advanced technical characteristics of our products. The main types of equipment produced at AZTM include:
- metallurgic equipment - roller tables, chain-linked conveyors, moulding-rolling machines, flux-cored wire production lines, etc.
- wiredrawing – rolling mills for single and multiple wire drawing of steel and colored metals.
- tube-rolling - cold-rolling mills for production of thin-walled smooth pipes and special types of pipes with high level of accuracy from carbon and alloy steel, cold-rolling mills for production of lateral-spiral ribbed tubes for cooling and heating systems equipment;
- as well as mining, oilfield, power utilities and general industrial equipment.
Belenergomash is one of the leading power engineering companies of Russia. Company has 6 production units that manufacture the products for nuclear and thermal power, gas-oil and chemical industry, industrial and civil construction. The main products are: seamless tubing, steel structures, pipelines, boilers and expansion bellows.
For over 60 years we have been making state-of-the-art systems for processing tubes, special sections, and bars to make production simplier, more innovative and more effective for our customers. Tube processing is our strength: laser cutting, bending, saw cutting and end-forming. We have a comprehensive range of solutions for a wide variety of applications.
Bauman Moscow State Technical University (BMSTU), founded in 1830, is a leading engineering university of Russia, recognized internationally. BMSTU is a leading research center. It has a unique base for research and development in diverse emerging areas of science and technology.
- Steel electric welded profile tubes (St. Std. 8639-82, St. Std. 8645-68, St. Std. 13663-86) tube dimensions vary from 15x15mm to 100x100mm, S-1,2-5,5mm;
- Steel electric welded straight seam tubes (St. Std. 10704-91, St. Std. 10705-80) with diameter from 16 to 127mm, S-1,2-5,5mm;
- Steel electric welded tubes used for water&gaz pipe-line (St. Std. 3262-75) with nominal bore from 15 to 100mm;
- Consumption goods: 21 types of shovels and spades, scraper, mattock, school and medical furniture steel work, metal designs, polyetlene parts, panels and window grates.
Brand Service. Special Projects company delivers services on industrial enterprises brand development, has a broad range of advertising tools having complexity and prompt response benefits. Annual Metal Expert and Chem-Courier Calendars have been issued since 2000. They are advertising media aimed at wide professional audience.
Annual informational maps have been issued since 2006. They combine exclusive content and effective tools aimed at brand development and are VIP market participants segment oriented.
BSK Steel — the steel power of technology.
BSK Steel is a modern factory specializing in the production of galvanized steel with a polymer coating.
Modern high-precision equipment. One-pass production cycle, as well as premium quality of materials, taken as a basis for finished products, allow us to occupy stable positions in the market.
Publishes specialized information and analytical magazines "The Bulletin of Industry, Business and Finance" - special edition for key sectors of the domestic industry, innovation, business services and financial analytics and "Interregional Industry and Trade" - publication dedicated to industrial and trading cooperation of regions of Russia with Kazakhstan, Belarus, CIS countries and Far abroad.
International magazine "Business Russia: industry, transport, social life" covers a broad range of economic issues. It is an information platform for active and successful participants of the market. Among our readers are founders and managers of Russian companies and enterprises, heads of power structures. Magazine is published with circulation of 20 000 copies distributed directly by mail and represented at specialized exhibitions in Russia and abroad.
Welcome to visit
booth Business Russia: industry, transport, social life
The Bradbury Group of companies make an extensive line of coil processing, rollforming, and related equipment and controls for a broad range of industries including metal building, trim shops, grain bins and grain storage, coil processing, cut-to-length, leveling, decking, steel framing, garage doors, HVAC, railroad, custom rollforming, heavy gauge rollforming, transportation and highway, automotive, automated production systems, lighting, shelving and racking, appliance and welded tubes, Product lines include advanced hydraulic levelers, high-speed presses and shears, hydraulic punch and cutoff systems, automation controls, insulated panel with all types of insulation materials (MIWO, EPS, PUR and PIR), variety of rollformers designed for fast tooling and section changes, including trim, panel, purlin rollformers and round and square tube lines. Our machines are capable of rollforming a wide range of material thickness, ranging from a fraction of a mm to 19 mm.
The Bronx Group supplies European built coil coating and processing line solutions. The group consists of several companies and each brand has its own specification: Bronx International have great experience in designing coil coating and galvanising lines, Bronx Engineering focuses on finishing lines, eg cut to length and slitting lines. Continuous development ensures Bronx is a world innovator in the design, manufacture and technology. One of the group branches, namely Bronx International, has been supplying both galvanising and colour coating lines to the Russia / CIS market for many years to various customers (e.g. Belpanel, StalColor, Steel Technology, Metal Profile, Prometal and others).Bronx is a well-known brand in this market with a reputation for quality and durability. Combined with a training package for line operators, dedicated customer service department and spare parts back up, Bronx offers a total supply package to the market.
Analytical equipment for the rapid analysis of the metals, alloys, and crude ores chemical composition:
- Handheld and stationary X-Ray Fluorescence spectrometers NITON;
- Stationary laboratory spark OE spectrometers Arun, are oriented for the PMI of metal-rolls, raw materials and stock quality control, analysis during the melting and casting, final product quality control of ferrous and nonferrous alloy.
Equipments are optimal adapted for the industrial welfare and provide rapid and simple sample preparation analysis.
And also: laboratory precision atomic absorption and atomic emission spectrometers, ICP-OES spectrometers, microwave sampling preparation and microwave organic synthesis, vacuum equipment, spectrometers spares and consumables.
Centravis is a leading supplier of seamless stainless steel tubes in the world with a solid reputation amongst customers in emerging and developed markets.
The Centravis’s product portfolio includes more than 1000 standard size tubes produced of more than 100 corrosion and heat resistant steel grades in 7 segments as follows: general tubes&pipes, boiler tubes, heat-exchanger tubing, instrumentation tubing, furnace tubes, hollow bars and Ni-alloy tubes.
The tubes are produced according to US ASTM standard, German EN DIN, French EN NF, Italian EN UNI and Eastern GOST and TU standards.
Chepetsky Mechanical Plant is a stock company, the part of TVEL Corporation belonging to Nuclear Power Federal Agency, is one of the world leaders in production structural materials and products for nuclear power engineering. Producer of high quality metal materials HighMet: titanium, zirconium, calcium, hafnium and niobium alloys products, superconductor materials. From raw material to final product – that is the Plant production cycle.
CMK is Top Russian manufacturer of high-quality materials for high-demanding industries. Company provides products of heat-resistant nickel base superalloys, special steels, titanium alloys for aircraft, space, nuclear, power generation, and mechanical engineering.CMK uses advanced production facilities and equipment, new technologies and materials, and modern methods of testing that allows us to manufacture products complying with global requirements in the industry.
Our tasks: fundamental, searching and engineering research, development and manufacturing works for creation of advanced, ecologically clean and resources-economy technology and equipment for new high-perfomance atomic power systems, supercritical parameters thermal plants, installations with steam-to-gas cycle, new generation metallurgical installations.
Kompozit produces the following Informative science-and-engineering journals (distributed through subscription):
- Construction materials, equipment and technologies of the XXI century (15 000 copies monthly);
- Concrete technologies (15 000 copies monthly);
- Roofing and insulation materials (15 000 copies monthly);
- Dry plasters & mortars (15 000 copies monthly).
Kompozit produces the following Informative science-and-engineering journals (distributed through subscription):
- Construction materials, equipment and technologies of the XXI century (15 000 copies monthly);
- Concrete technologies (15 000 copies monthly);
- Roofing and insulation materials (15 000 copies monthly);
- Dry plasters & mortars (15 000 copies monthly).
Welcome to visit
Booth Construction Materials, Equipment and Technologies of the XXI Century 4B67
Dango & Dienenthal Filtertechnik GmbH has an extensive know-how and experience in solid / liquid reparation and manufactures i.e. maintenance-free, self-regulating backwash-filters having trouble-free backwash, time and/or differential pressure controlled, for sustained performance. Separators (Hydrocyclones), Single- / Duplex- Filters, Bag Filters as well as Sludge Dewatering Devices also belongs to our program.
Dango & Dienenthal, founded in 1865 is a long-established family-owned company and is specialized in the manufacture of machines and equipment for the iron and steel, aluminium and ferroalloys industries all over the world.
Professional transportation of metal structures, metal products, all kinds of rolled metal, metal sheets, pipes and pipe assortment, equipment (including complex), machinery parts by trucks in Russia and to Kazakhstan.
Modern own fleet of over 1100 road trains. Tarpaulin semi-trailers with volume of 90m3 (length 13.6 m) and 110m3 (length 16.5 m), bunk stakes.
Improved crate of the trailer. All types of loading / unloading (bottom, top, side)
Experience of working with industry leaders more than 18 years.
Professionally. Securely. Without overpayments.
Monthly Railway Journal Directory DEPO is published in the spring of 2008. The magazine provides information on manufacturers and suppliers of all range of products railway destination:
- Manufacturers of railway products and services;
- Rolling stock, spare parts, repair;
- Materials and equipment for VSP;
- Railway tools, equipment;
- Transport and logistics services;
- Machine tools and press-forging equipment;
- Related products and services;
- Legal and insurance services for rail transport enterprises;
- Methodical and reference literature. Database.
Derren, JSC represents number of well know producers and supplies to Russian customers wide range of steels and grades for very wide applications areas - from tooling to components. We supply rounds, flats, sheets, blocks and also different castings. We also have possibility to supply "ready to install" components. High qualified engineers employed by Derren, JSC are able to provide technical support to our customers on any stage of cooperation — from chosing of correct materials and design to heat treatment.
- Lifting cranes (overhead, gantry cranes, jib cranes);
- Lifting electromagnets for different types of loads;
- Electro-permanent magnets;
- Grabs and clamshell buckets for scrap and bulk materials;
- All types of electromagnetic separators (suspended, self-cleaning, pulley separators);
- Control systems of electromagnets and separators;
- Uninterrupted power supply for electromagnets;
- Spreader beams;
- Cable reels.
East Steel Liability LLimited Company — a modern company specializing in the manufacture and sale of galvanized steel with polymer coating and additional elements. The company today is one of the largest digging in the production and supply of galvanized steel in the Far East. Currently, Eastern Steel LLC continues to evolve. The planned projects have been successfully implemented, which led the company to be a leader on the market of the Far East.
Over its century-long history ELECTROSTAL Metallurgical Plant JSC has been the leading supplier of high-alloyed steels and heat-resistant alloys in a range of product forms, and today our company is a premier supplier of the aerospace industry.
A unique complex of state-of-the-art metallurgical equipment which includes open induction and open arc furnaces, vacuum induction and vacuum arc furnaces, as well as electroslag, electron-beam and plasma-arc remelting furnaces combined with rolling machinery, press-forging plants, wire-drawing and strip-rolling mills, enables us to apply all the currently known techniques for special steels melting and remelting, and allows to combine different methods of deformation followed by heat treatment and surface machining.
The company supplies discs, rings, shafts of variable cross-section, forgings, flat rolled stock and rolled bars, as well as wire and strip to the domestic and international markets.
The quality management system of ELECTROSTAL Metallurgical Plant JSC is certified compliant with ISO 9001 and AS/EN/JISQ 9100 standards. We carry out overall control at every production stage, which guarantees fulfillment of the most demanding customer requirements.
International information and technology full-color A4 format Magazine Equipment and Tools for Professionals. Metalworking has been published since 2000 and is 100 pages in volume.
The circulation figurers are 10,000 copies 6 Issues a year.
Target groups: Management and leading technologists, metallurgists, welders, supply agents of machine building plants, metallurgical works and other industrial enterprises, research officers, university teachers.
Rubrics: metal working, welding, machines, tools.
Europack company develops and introduces high technologies for packaging of steel products for ferrous and nonferrous industries, as also produces and supplies packaging materials and equipment for heavy industries and service centers. Thanks to long experience Europack company provides to the Client outsourcing services for packaging of steel products and guarantees high quality of packaging and takes full responsibility for final result.
EVRAZ Metall Inprom is one of the Russian leading steel traders delivering rebar, shapes, flat, tubular and long products by the leading CIS manufacturers. The major part of these products is manufactured by EVRAZ Group companies - EVRAZ Consolidated West Siberian Metallurgical Plant and Nizhny Tagil Metallurgical Plant. Regional coverage in Russia is ensured by 48 branches located in the industrial centers in the southern and north-western regions of Russia, Central Black Earth region, Volga region, Siberia, Urals, Far East and Kazakhstan. The product range represented by each of the branches is determined by the local market, steel products are shipped to customer from local warehouses or directly from manufacturer. EVRAZ Metall Inprom offers primary machining services. Our service centers employ 12 types of hi-tech equipment (more than 200 units) with a capacity to process 1 million t. of steel annually.
EZTM, JSC designs and manufactures equipment for production of steel seamless hot-rolled, welded and cold-rolled tubes; bar; balls; rings; roll-formed section. EZTM, JSC supplies oil film bearings, rolls for cold and hot rolling, blast furnace valves, crushing equipment,
gearboxes, spindles, gear couplings, gear wheels, gear shafts, metal structures and etc. EZTM, JSC supplies castings with weight up to 70 t, forgings with weight up to 25 t.
Fasteners, Adhesives, Tools and… Magazine is published since 2002 and contains the information on modern products and assembly technologies, the News from foreign partners.
We see our mission in providing fastener, adhesives, tools traders and users with technical supportive information as well as in promoting foreign companies based on high-quality products and advanced technology into the Russian market. You can find PDF-copies at www.fastinfo.ru.
Company "Fibrous Refractories Ltd." is the developer of technologies and the producer of products, produced by non-fired technology in the form of wet thick felt, boards, cardboards, blocks and different shaped details. Maximum usage temperature is 1200 C and 1350 C.
Limited company "Fibrous Refractories" has successfully run in a large-lot production of shell-type pieces of shrink heads' casts, as gas pressure wifh the exothermal composites heating, as heat-insulated, adiabatic composites. Serial producing of inserts according to the individual, technical customer`s data is possible.
The Non-profit organization Foundation for Development of Tube Industry was established in 1999 by the largest tube and pipe plants of the Russian Federation. At present, the founders of the Foundation are Volzhskiy, Severskiy, Sinarskiy, Chelyabinskiy, Pervouralskiy, Almetyevskiy Tube plants and Vyksunskiy, Taganrogskiy Metallurgical Plants. The Foundation aimes at promotion and protection of interests of Russian tubes and pipes producers in the domestic and international markets.
Welcome to visit
Booth Foundation for Development of Tube Industry Каталог
Bibliotechka Liteischika contains the reviews of patents and inventions, the state standards on the foundry materials, technologies and equipment: abstracts of Russian and foreign journals’ publication on foundry; commented paragraphs of the specialized dictionaries and reference books, interesting popular information on foundry and castings, foundry world personalities; legal consulting page.
We offer rolled steel items and products of heat-resistant, stainless special steel alloy grades, including nickel (Ni) and titanium (Ti) based alloys. Product line: rolled sections, tubular, sheet, wire, strip, cast alloys, stamped items, rings, vanes and large-sized castings.
Thanks to equipment machining complicated items of alloys steels and alloys GALION delivers roughly or finally machined disks, rings, and shafts.
Gasparini S.p.A. is a leading European company producing hi-tech machinery for the sheet metal processing industry. Gasparini roll forming lines are tailored machines, with integrated processes of punching, notching, folding, welding, cutting, handling and packing, all depending on Customer’s requirements. The lines made by Gasparini work on different types of materials and thickness, from coil or pre cut steels.
The integrated multi-discipline scientific research institute carrying out fundamental, conceptual and applied research aimed at creating a scientific, technical and technological basis for the metallurgical sector of industry producing base metals, rare metals, rare-earth metals and associated metals, including also noble metals, as well as at developing innovative highly efficient process technologies and equipment, feasibility studies, project design development and engineering design documentation.
Giprotsvetmet, FGUP is a leading institute specializing in design development of nonferrous metallurgical plants in the Russian Federation and the main design developer in the sector of industry producing copper, lead and zinc.
The institute made in the past a significant contribution to the development of the nonferrous metals industry in Russia and in other CIS countries and was involved in solution of most important issues related to extensive development of copper and polymetallic ore deposits in Central, Eastern and Southern Kazakhstan, in the South Urals, Central Asia, the Trans-Caucasian region and in East Siberia.
Currently, the Giprotsvetmet Institute fulfills the functions of a design development and research institution responsible for advanced developments in the following areas:
- Development of highly efficient technologies for exploitation of base metal ore deposits, as well as for most complete and rational usage of subsoil resources;
- Improvement of technologies and organization of operation of underground mines and expansion of mineral resources basis for the ore mining sector of industry;
- Development of advanced methods for geological and hydrogeological exploration of nonferrous ore deposits;
- Preparation at a high technical level of feasibility studies, substantiation of investments for projects, development of project design and engineering design documentation for mining, mineral processing and metallurgical enterprises;
- Introduction and extensive utilization of advanced technology for project management on the basis of the world’s best available practices.
GIVA Group — the European leading forging manufacturer of a mediaum and large rolled items to 9500 mm in dia, height up to 5000 mm and open dye forging items, weight from 200 kg to 250 000 kg. Applications: petrochemical, nuclear industry, shipbuilding, the paper and cement industries, heavy mechanical engineering and etc.
Hydromec is an Italian company specialized in manufacturing highly advanced presses and automations with patented solutions that grant outstanding performances. Hydromec supplies complete engineering plants for hot foming of brass and aluminium (mechanical and hydraulic presses, capacity 2.000-10.000 kN) and steel forging (hydraulic presses capacity 10.000-200.000 kN, axial-radial ring rolling machines for rings D400-7.000mm) fully integrated with manipulators or any automation systems.
IMS Messsysteme GmbH is the leading world manufacturers of X-ray, isotope and optical measuring systems for steel, metal, tube and aluminum industry.
During the production process our noncontact system detects various geometrical parameters of steel and aluminum strip, plate and tube as well as various defects. This allows to optimize our industrial equipment, to improve quality of our production and to reduce production costs.
The industrial Bulletin – monthly business information-advertizing magazine about industrial sector of economy. It publishes reviews and analytics, interviews with executives, marketing researches, topical articles covering the following spheres: machine-building, metal processing, casting, welding, industrial equipment, engineering tools, instrumentation, power engineering, electrical equipment, construction, technical chemistry, protection against corrosion, chemistry, mechanical rubber goods, fairs, goods and prices.
Production of our company demonstrates high quality of used raw materials, strict control of technology process and is certified. We produce high-dispersed zinc powder with 10 micron sphere-shaped particles, Zinc alloy.
The Russian producer has long-term experience of creating the equipment for deep scrap recycling containing non-ferrous metal. We produce: the machines for armored, oiled, polyethylene cable shredding, the machines for shredding tubes covered by aluminium layer (for frodges refrigerators, radiators); the lines for cable residues recycling with obtaining Al or cu granules; the lines for recycling of lead-acid accumulate batteries, equipment for rehandling of oversized wastes.
For 70 years we have been rendering comprehensive informational services to the enterprises and organizations in the iron and steel industry and related sectors. Research within the whole range of the equipment and technology development in steel industry and market of steel products. Publication of the following journals: News of the Iron and Steel Industry in Foreign Countries, and Iron & Steel Industry Bulletin.
Knife workshop Source – the team of craftsmen is passionate about the development and production of knives. Blades for knives cut on wire EDM and waterjet machines. Quenching and tempering is carried out in computer-controlled muffle furnaces. Grinding blades for knives, our masters produce on belt-grinding machines (grinders). At present, we have our own forging site for the production of forged blanks for blades. The main direction - production of hunting knives. For knives we use as our domestic steel (95X18, 110Х18 MSD, KH12MF, KH12F1, 9KHS, U10A), Bohler K110, K340 Bohler, Bohler M390, Elmax, Bohler N695, CPM D2.
The company IZOMAT since 1997 is one of the leading companies of the Russian market for the supply and manufacture of high temperature insulation materials and products.
Also we supply industrial burners, adjusting devices, measuring, mixing, and control and protection systems for industrial combustion systems and representative of ESA Pyronics, italian burner producer.
KAMAG is a member of the TII-Group, which is world market leader in the manufacturer of heavy-duty vehicles equipped with hydraulically suspended pendulum axes. As a recognized specialist in heavy duty transportation, we are qualified partners worldwide for freight forwarders, construction firms, shipyards, iron and steel plants, tunnel & bridge constructors, constructors of large scale plants, ports, container terminals for the offshore as well as the aero and space industries. KAMAG transporters master the special requirements of the offshore and shipyard industry with excellence. Our transporters move giant ships, submarines, or even more completely prefabricated drilling platforms. Flexibility, profitability and precision are great reasons to use KAMAG transport technology.
LLP "Kazogneupor 2015" is an industrial enterprise for the production of refractory materials. Large in Central Asia and one of the largest producers of refractory aluminosilicate composition in the CIS based on its own electrocorundum and chamotte.
Mission of the company: efficient and careful use of natural and technical resources in the industrial production of high-quality refractory materials with the best technical characteristics and determining the safety of use.
The company's goal: the creation and continuous improvement of high-quality refractory products, ensuring the safety and effectiveness of the application in the future production.
Wholesale of stainless steel (corrosion-proof), heat-resistant steel, titanium and precision alloys in all of Russia.
12 years in the market of stainless steel.
Direct supplies from manufacturing plant in Russia, direct deliveries from Europe (10 days), China (18 days), India (30 days).
In- house production of pipeline units (offsets, pipe bends, crossing, fittings)
Always in stock any sizes of stainless steel : tubes, sheets, wire, coils, bends, transitions, flanges. The own 24/7 stock.
Steel 12Х18Н10Т, 10Х17Н13М2Т, 20Х23Н18, 15Х25Т, 06ХН28МДТ, ХН32Т, ХН35ВТ, ХН60ВТ, ХН78Т, ВТ1-0, ОТ4, ОТ4-0, ВТ3-1, ВТ5-1, ВТ5, ВТ6, ВТ20, ПТ1-М, ПТ7-М, and also import foreign analogues AISI 201, AISI 304 (L), AISI 309/309 S, AISI 310/310S, AISI 314, AISI316/316L, AISI 316 Ti, AISI 430, AISI 409 (L), AISI 904L.
KWINTMADI company is supplier of road construction, crushing, screening, concrete placing and log handling equipment. The geographical area covered by the company is Russia. Company partners are world leading manufacturers for the range of equipment: Sinnebogen, Gomaco, Terex, Powerscreen.
The company Kabel.RF is not only the leading expert in the cable industry, but also one of the top distributors of cable and electrical products in the Russia market. There are more than 100,000 items in our business directory that allow the clients to make the right decision. Kabel RF distributes cable products from warehouses located on the territory of Russia. When you order our products, we will provide all the nessesary certificates and documents about the product`s quality.
Kabel.RF: We follow new trends in the cable industry and electrical engineering and we have promised to provide our customers with the best products and excellent service!"
Italian company LDM is regarded as a leading company in engineering and manufacturing of coil processing machines with thickness 0.3—16 mm:
- Fine leveling machines and cut-to-lenght lines;
- Slitting lines;
- Coil rewinding lines;
- Materialfeeding lines for presses;
- Revamping used lines following the latest technologies.
Laser-export Co. presents its novel laser analyzer of material elemental composition, ELANIK, the first handheld analyzer which allows measuring of carbon concentration simultaneously with the other elements, without inert gas purging and other consumables.
ELANIK is based on LIBS method, which can be used to measure concentrations of all elements, including light (C, Be, Li, etc.). Laser-export Co. is a part of the "LASER-COMPACT"-group, known for compact lasers of its own design: since 1992 more than
47 thousand lasers have been produced and delivered in 42 countries, the main share in the USA, Germany, France, and Japan.
Lechler — advanced spray technology for the metallurgucal industry. Lechler spray nozzles and systems are used in virtually every stage of metallurgical industry and their performance can have a major impact on products quality and manufacturing costs. For over 135 years. In addition to the headquarters in Metzingen, Germany, subsidiary companies have plants and offices in the UK, France, Belguem, Sweden, Finland, Spain, Italy, USA, Mal.aysia, India and Cina. We also have a network of sales offices and representatives covering many other counties.
Liebherr equipment and machinery: machines for scrap metal handling, wheel loaders, crawler loaders for steel mills (special version for high-temperature application), telescopic manipulators Leonard for lining scraping and removal slag from shovels. Service and spare parts.
The international scientific-technological journal «Liteinoye proizvodstvo» with a scientific attachment each decade, is the country’s leading scientifictechnological journal covering foundry issues. We have recently celebrated our 80-th anniversary. «Liteinoye proizvodstvo» monthly gives unique information on the domestic industry’s new processes, technologies,
equipment and materials used for quality casting production. We also cover exhibitions, seminars and other considerable events, give analytical reviews of mostly prospective enterprises within the context of modern trends in Russia’s economy, introduce the industry’s key personalities in Russia and the CIS.
Public Joint Stock Company Magnitogorsk Iron and Steel Works (PJSC MMK) is one of the world's largest steel producers and holds leading positions among the Russia`s steel-making companies.
The company's assets in Russia include a large steel producing complex encompassing the entire production chain, from preparation of iron ore to downstream processing of rolled steel.
MMK turns out a broad range of steel products with a predominant share of high-value-added products.
Main customers of MMK on the domestic market include pipe-making companies, hardware companies, machine-building and automotive companies.
In 2017, MMK Group produced 12.9 million tonnes of crude steel and 11.6 million tonnes of commercial steel products. MMK Group’s revenue for 2017 amounted to USD 7.546 billion, EBITDA – USD 2.032 billion.
Melytec, LLC deliveries installation and service carries out of the
equipment for follow areas:
• spectrometers and diffractometers of Bruker company (Germany);
• equipment for sample preparation of Struers company (Denmark);
• microscopes of Olympus company (Japan);
• hardness testing machines of EMCO-TEST company (Austria);
• equipment for measuring at nano range of Nanovea company (USA);
• electron microscopes of FEI company /Netherlands/;
• desktop scanning electronic microscope of Phenom-World company
• universal testing machines of Walter+Bai company /Switzerland/;
• high-frequency testing systems of RUMUL company /Switzerland/;
• X-ray computed tomography of NSI company /USA/;
Published since 1996. email@example.com
Circulation: 8 000—12 000 copies, at least 112 full-color type pages, a special issue in English.
Periodicity: 12 issues a year (monthly).
Scope: Russian & international ferrous & non-ferrous markets: news, analytics, interviews, reviews, reports, etc.
Target groups: Russian producers and traders of steel, rolled products, tubes and pipes, steel wire products, non-ferrous metals and alloys, major metal and steel consumers, as well as to the CIS enterprises & companies.
Arranging & holding of the largest annual conferences (ferrous and non-ferrous metals).
Membership: Russian Union of Metal and Steel Suppliers, Russian Union of Industrialists and Entrepreneurs.
The agency includes such brands as Metal-Courier/Metal Expert (information, analysis and researches of the markets for ferrous, non-ferrous metals and raw materials), Metal Expert Consulting (market and economic researches, development of individual recommendations), Chem-Courier (information, analysis and researches of the market for chemicals), Industrial Cargoes (information, analysis and researches of the market for industrial cargo transportation), Business-Forum (specialized industrial and market conferences), Brand-Service (industrial brand promoting service).
The company Metallinvest has been successfully operating in the metal rolling market since 1991, has established itself as a reliable partner, supplier and manufacturer of metal products. The developed distribution network of the company covers the entire territory of Russia. Deliveries are made throughout the territory of the Russian Federation, CIS countries and foreign countries.
The company Metallinvest is an active member of the Russian Union of Metalware Suppliers (RSPM). Annually takes the leading place in the industry ratings among metal trading companies in Russia.
The main advantages of the company Metallinvest: a wide range of quality metal products in warehouses; picking of wagons of any collection; individual and flexible pricing; commodity crediting; speed of service and minimum delivery time.
MetallTrade is a periodic advertising-information magazine for professionals of industrial supply and the sale. The magazine leaves in circulation of 7000 copies 2 times in month and has site www.metaltd.ru where we publish the latest news in sphere of the Russian and world iron and steel industry and also news of our partners.
Leading Russian-language Journal for the Steel Industry since 1956. Unrivaled Advertising Price/Efficiency Offer to Suppliers to the Iron and Steel Industry.
- Development prospects for the metallurgical industries;
- Scientific and technical developments;
- Materials and product quality;
- Main enterprise funds: diagnostics and repair;
- Automation and control;
- Environmental protection;
- Company presentations.
The Metallurg Magazine is translated into English by the company Springer.
Metallurg is distributed by subscription in the CIS and 15 countries world-wide. Index 70535.
Metallurgical Bulletin is a Russian monthly magazine providing unexcelled insight into the domestic and global ferrous and nonferrous metals markets through a large spectrum of information, news, price movements and analytical coverage and forecasts. Metallurgical Bulletin is a full-colored glossy with a circulation of 7500 issues spread throughout Russia, the CIS countries and beyond.
International Union of Metallurgical Equipment Producers Metallurgmash is association, which combine metallurgical machine-building companies of Russia and foreign countries.
The International Union Metallurgmash includes more than 50 members, among which — State scientific centers of the Russian Federation, engineering companies, universities and educational centers, metallurgical and machine-building works from Russia, Ukraine, Belarus, Italy, Germany and Finland.
The priority direction for Metallurgmash is the development of engineering and active participation in preliminary spates of modernization programs of the metallurgical manufacturing. Performance of preliminary works by it for a number of the metallurgical companies allow to recommend the equipment and technologies of members of Union for inclusion in technical projects.
The international scientific-technological journal Metallurgy of Machinery Building is issued six times a year. It publishes articles on innovative metallic materials for machinery construction, methods of their processing, prospective technologies of blank production stage. We deal with the work of metallurgy departments ofthe largest machinery construction enterprises of Russia and the CIS and present the equipment of domestic and foreign manufacturers.
MetalRussia is devoted to metallurgy industry and mining engineering, gives coverage to equipment and technologies for metallurgy industry. The magazine is aimed at active metal professionals and experts in Russia and CIS. The issue accomplishes informational and business contacts between producers (metal technologies, machines, equipment) and consumers (building industry, automobile construction, shipping industry etc) in metallurgy industry. Every issue has interview with head of large company — leading player of the metallurgy market, scientific and technical materials and economic analytics written by experts.
MetalTorg.Ru is a Russian most frequently visited web service highlighting metal markets via its fresh-time news line and thorough analytical reports and outlooks, as well as price monitoring and price-indexes both on ferrous and nonferrous metals markets in Russia and overseas. MetalTirg.Ru provides on a daily basis price-lists, Bulletin Board with an extensive stream of renewing offers and invites to its Forum all those interested in metal market developments.
MetProm Group, founded in 1992, is an engineering company specialized in the implementation of EPC(M) projects in the metallurgical sector in Russia and abroad. MetProm Group has its own resources to provide full cycle of engineering and construction activities.
We offer engineer of production facilities, supply of technologies and equipment, construction, installation supervision, commissioning, warranty and service maintenance of equipment.
Extensive experience of MetProm Group guarantees its customers maximum efficiency in the implementation of modernization projects and construction of new industrial facilities.
National University of Science and Technology MISIS is a scientific and education center for training specialists in metal science. The research institute combines advanced education technologies with scientific work. Today the university includes 6 institutes based on departments: Institute of Basic Education, Institute of Metallurgy, Ecology and Quality, Institute of Materials Technology, Institute of Physics and Chemistry of Materials, Institute of Ecomony and Information Science, Humanitarian Institute, Evening Department, and Remote Education Department. MISIS does researches and trains in the following fields: metallurgy and materials science; metal production and metal treatment; production of compound, powder, super- and semiconducting materials, nano-materials and nanotechnologies; development of advanced materials and technologies; increase of raw material effectiveness; certification and quality management of materials and their production; economics and management issues; ecological issues; informatics and automated control systems.
The company specializes in manufacture of high-temperature heat insulating materials and products on their base. In order to expand markets in Russia and CIS countries a new joint venture to produce high-temperature heat-insulating materials and products was arranged in April 2006 based on Sukhoy Log Refractories Works JSC. The main produced & delivered products as follows:
- Refractory mullite;
- Silica heat-insulating;
- Fibre materials and products;
- Products produced with ceramic fibre: MKRR-130, MKRV-200, MKRRH-150, MKRVH-250;
- Refractory heat-insulating boards: MKRP-340, MKRGP-500 and MKRGPO-650;
- Refractory flexible and plate-type cardboard MKRKG-400 and MKRKL-450;
- Mullite-silica heat-insulating fibre shapes;
- Ceramic fibre blankets: Cerablanket and Cerachemblanket;
- Modules: Pyro-Log and Pyro-Bloc;
- Heat-insulating module Z-Bloc;
- Heat-insulating paper Superwool and Kaowool;
- Heat-insulating fibre board- Kaowool Board;
- Chopped ceramic fibre RUVOL-M, RUVOL-MH and TIAS.
Tel.: +7 (34373) 6-44-00, 6-43-58
Tel./fax: +7 (34373) 6-42-87, 6-43-66
General Director: Anatoly V. Mamaev.
"Motovilikha - civil engineering company" metallurgical products and oilfield equipment. Metallurgical products includes articles made from structural, alloyed, stainless and special steels: forging, stamping, rolled
section steel, cast rough wagon and locomotive axis, bloom, slabs and ingots. The major consuming sectors are energy, oil and gas, railway mechanical engineering, aircraft building, military-industrial complex,
shipbuilding. There ia a possibility to carry out machining, heat treatment and coating. The company has all types of production control.
Welcome to visit
Booth Motovilikha - Civil Engineering Company 1B58
Company MTK is one of the leading suppliers of steel pipes on the Russian market. Over 2000 tons of a wide range of pipes from 530 to 2820 mm in diameter are always in stock and available for sale. Own laboratory passed certification allows us to control the quality of the pipes and to ensure compliance with the highest standards of incoming raw materials and finished products. We always offer favorable terms, prompt delivery and flexible fulfilling of orders.
Neftegaz.RU is a leading business website for the oil, gas and petrochemical companies in Russia and abroad. It contains up-to date information, news and analytics on Russian and worldwide O&G issues. The database contains more than 28,000 enterprises, more than 152,000 product names, technical library and the unique photo bank.
NLMK Group is a leading international manufacturer of high-quality steel products with a vertically integrated business model. Mining and steelmaking are concentrated in cost-efficient regions; finished products are manufactured close to our main costumers in Russia, North America, and the EU.
Thanks to our self-sufficiency in key raw materials and energy, coupled with the technological superiority of our production capacity, NLMK is one of the most efficient and profitable steelmakers in the world.
NLMK actively invests in environmental projects, reducing its footprint in the regions where it operates and striving to comply with the highest environmental standards. NLMK Group creates safe working conditions through process improvements, professional training sessions for its employees, and application of the best global standards in occupational health and safety.
JSC "Novotroitsk Plant of Chromium Compounds" is one of the largest world producers of chrome metal, electrolytic chrome, degased electrolytic chrome, chrome and aluminium powders, chrome based alloying briquetted tablets, low-carbon ferrochrome, nitride chrome, and chromium compounds.
Welcome to visit
Booth Novotroitsk Plant of Chromium Compounds 1G60
NSplav LLC is an innovative export oriented company which specializes in production of chrome metal (lumps and powder) and chromebriquettes degassed withtechnical parameters according to individual requirements of the Customerrs.
Oilgear is an international company leader in designing and producing hydraulic components, system and automation control for forging presses, extrusion presses, steel plants and oil & gas industry. We can supply just components for oil, water, water based fluid or complete systems/presses key in hands.
OMCD was established in 1967 as the lader of 6 existing companies active in hard metal sintering. Tungsten carbide, tungsten copper and precious metals have been worked on by the OMCD Group companies since 1948.
OMZ-Special Steels LLC, incorporated in OMZ Group, — is the largest manufacturer of special steel grade metallurgical forgings and hot rolled plates for power, nuclear and general engineering, metallurgy, petrochemical, oil and gas industries, and shipbuilding.
Company’s products are steel forgings (weighing up to 260 tons), steel castings (weighing up to 170 tons) and hot-rolled plates (with thickness up to 450 mm) of different steel grades: from conventional carbon to stainless and special destination steel grades, the produced range of which is over 300 brands.
Company has experience in production and supply of products as per ASTM, JIS, DIN, NFA, BS and other standards.
10 journals in the field of mining matter and metallurgy:
- Gornyi Zhurnal — the oldest (established in 1825) and monthly scientific-technical edition in the field of mining matter in CIS;
- Obogashchenie Rud — the only Russian edition in the field of mineral processing;
-Tsvetnye Metally — the leading monthly journal in CIS covering the area of nonferrous metallurgy;
- Chernye Metally — universal monthly journal presenting information as about Russian, as well as about foreign iron and steel industry;
- Gornyi Mir Muzeev — special edition about the role of mining matter and metallurgy in cultural and historical heritage;
- Ore and Metals Weekly — free-of-charge electronic newsletter, can be subscribed in www.rudmet.ru;
- Special English editions: Eurasian Mining, Non-Ferrous Metals and CIS Iron & Steel Review.
Wilhelm Oberste-Beulmann GmbH & Co., KG is a leading supplier of the tool-and high speed steels in Europe. Since 40 years Wilhelm Oberste-Beulmann GmbH & Co., KG successfully supplies special steels of best manufactures corresponding to European standards.
Parallel is a manufacturer of high impact fasteners with quality grade up to 14.9. Modern factory for fasteners production in Russia, one of the biggest suppliers of higher quality grade fasteners:
- Cutting edge equipment made by the best world manufacturers;
- European level of labor productivity;
- Overall production 6 000 tons of fasteners and engineering units per year, quality control system is certified in accordance with ISO 9001:2008;
- Certified laboratory performs all kinds of destructive and non-destructive inspection.
We manufacture bolts, nuts, washers, studs, items according drawings: From M5 up to M150 Any steel kind with tensile grade 8.8, 10.9, 12.9, 14.9, Any kind of finishing With coating or plain With non-standard threads and various thread pitches, We execute orders from 1pc up to dozens of tons Certified by bridge inspection. We are open for your specialists visits and for outsource technical audit.
JSC "Firma "PERMANENT K&M" is focused on various projects in modernisation, technical re-equipment, renovation of the installed production and setup of new production facilities as well as implementation of Russian and foreign technologies into industrial areas such as mining and metallurgical complex, mechanical engineering, metalworking and oil and gas industry. The company offers hi-tech Russian and foreign products for the metallurgical industry including Eco recycling technology of metallurgical waste by means of briquetting and mechanical activation and High temperature lubricants ROILLUB
Company specializes in manufacturing of high standard roll-forming machines and related products for sheet metal industry eg. trapeze, double deck and tile sheet rollformers, decoilers, cut-to-length and slitting lines, gutter- and downspout machines.
ZAO "Trumpet Factory" Profile-Akras "named after Makarov VV" is a manufacturer of MSD pipes in the Volgograd region. The range of profile pipes from 10x10 to 120x80, the thickness of the walls from 0,5mm to 4,0mm. A variety of round pipes from DN9.8 to DN127, wall thicknesses from 0.5mm to 4.0mm. Pipes of VGP from DN15 to DN90, wall thicknesses from 1.5mm to 4.0mm. The company also produces pipes with triangular, flat-oval and arched profiles. We invite you to shop! Tel / fax: (8443) 34-27-43.
Trade from the storage and the contract deliveries of steel and plastic sheet piles (panels) from Japan, Korea, USA, Germany, Czech Republic, Poland, Russia, Luxemburg - sheet piles U-section, Z- section, flat; cold-bent; welded: pipes piles, bearing piles; the piles connectors of different types with the interlock of the Larsen type, “Ball and Socket Interlock”, cold-bent interlock, welded interlock or without the lock; the combined walls and system with the elastic moment to 50 000 sm3/m.
Complex of services on driving and extraction sheet piles - selection under the project, delivery, driving, extraction, removal, reverse ransom.
We have created and is supplemented its own base of sheet piles data of the production (steel and plastic sheet piles) of that produced by basic world producers. In the base is generalized and systematized the information about the characteristics more than 5020 in the world the sheet piles and combined sheet pile walls produced. The data base makes it possible to produce the automated selection of the sheet pile solutions with the normalized parameters for the purpose of the decrease of the prime cost of the projected sheet pile wall. We develop and we produce the new forms of sheet piles profiles, interlocks and connectors.
Trade from the storage and transit deliveries from the basic metallurgical plants of Russia and CIS of construction rolled metal product made of different steels - reinforcement AI-AV; Beam rolled, welded; Rolled wire, square, circle, strip, wire; hot/cold rolled sheet, zinc-coated, shaped; road grids, wall grids; Pipes steel profile, electric welding, cast iron, to; (un)equal leg angles, flange channels, sheet piles.
PROTEK Group of Companies (PROTEK GC) is one of the largest construction supplying companies of Tsentralno-Chernozemny region. Unique character of PROTEK GC is attributable to the opportunity of providing the customers with the WHOLE complex of construction products, ranging from the rolled metal products, pipes and cement to the paint and lacquer and roofing materials. The Group’s companies have a significant package of exclusive dealer agreements made with the leading domestic and foreign manufacturers which enable to supply construction materials to the consumer at most favorable prices. PROTEK has a network of the well-equipped up-to-date warehouse distribution centers with convenient access ways.
Owing to broad geography, hi-tech data exchange system and access to web purchasing the company is capable of meeting the requirements of a wide range of purchasers both in Russia and abroad. To enhance the service efficiency an integrated information system has been developed with an online shop and online price list being its integral part, which provides for receipt of the effective data on goods and prices, effecting purchases and getting competent advice when choosing the products.
PROTEK GC dates back to 1992. For this period of time the company has managed to establish a distribution network that is represented by 10 trade and service complexes located in the territory of Central and Privolzhsky Federal Districts. Commodity items assortment accounts for over 25 thousand items of metal products, construction and finishing materials.
The metal service subdivision consisting of a sheet steel processing center, a reinforcement service center and a fabrication shop enables directly to provide its customers with own products. The enterprise has its own fleet of trucks and special vehicles at its disposal.
PROTEK GC is currently maintaining a large variety of construction products at its depots, focused both on large enterprises and on individuals who are involved in business, construction and repair of their own house.
In 2013 PROTEK GC logistics center was pronounced the winner of the contest “The best scrap metal company of Russia” in the category “High quality example”.
Purpose of publication — propagation of achievements of domestic science and industry, high technologies, the promotion of their use in the real sector of economy of the Russian Federation, the dissemination of professional knowledge; information support of business activity and the prestige of the emerging domestic high-tech companies, the management staff, scientists, major Industrialists of the Russian Federation; informing of competitive science-intensive products and services of domestic enterprises for their promotion to the markets of Russia and other countries.
QForm - one of the most known program in the world intended for simulation of technological processes of deformation (Heat treatment, Hot Forging, Cold Forging, Open die forging, Rolling, Reducer rolling, Transverse and ring rolling, Extrusion). Program has a usable interface, the base is unic final element method for processes simulation of metal forming by kinematic, energy and rotational equipment.
RHYTHM of Machinery, Magazine — the special magazine on equipment market, industrial instrument, rigging, components and concomitant materials.
Circulation: 10 000 copies.
Magazine is issued 10 times a year (since 2002). Format A4.
Free highly effective mailing to specialized businesses.
Free distribution on exhibitions Important information for engineering auditory.
Actual information for machine-builders.
The company "ROMEK" manufactures wide range of lifting equipment. The company offers cargo slings (wire rope slings, textile slings, chain slings), metal structures (lifting beams, clamps), steel wire rope, wide range of rigging, components for slings, everything for lifting, securing and movement of cargo.
RSMETALL Ltd. is a dinamically developing company, founded in July 2004. The company's principal activity is the production of high quality electric-welded tubes of round and rectangular cross sections of varying lengths and sizes, as well as steel constructions of any complexity, profied deck.
Ruscana Engineering is the developing and manufacturing company. The main products are metal processing lines such as cut-to-length lines, slitting lines, rollforming lines (metal tile, metal deck, metal siding, metal facing panel, and others).
The Basic Product Mix:
- Seamless rolled and welded rings from sheet material and rolled profiles for aerospace, auto, oil and gas application, for agriculture, chemical and power machine building, for shipbuilding, etc. Diameter: from 200 up to 6000 mm;
- Flat and weld neck flanges for pipe lines and pipe fittings;
- Bars and strips from high speed steels and titanium alloys;
- Forgings and ingots from carbon, alloyed, Ti-based and heat resistant steel and alloys.
Russian Engineering Union is a federal organization and a center of consolidation of Russian machine-building society chaired by S.V. Chemezov, Director General of Rostekhnologii, a state corporation. The company consists of 64 regional representatives. The main type of activity of the union includes uniting the strengths of the state, society and machine-builders for development of Russian machine-building.
Russian Union of Metal and Steel Suppliers is a non-commercial organization, uniting on the voluntary basis Russian companies, firms and organizations operating in different segments of metal and steel products market including metal and steel rolled products, tubes and pipes, metalware, as well as metal scrap collecting and recycling.
The majority of members of the Union are companies that proved to be reliable and professional partners in the metal and steel products market. Their activity includes both trading from stocks, manufacturing diversified types of metal products as well as metal working and processing.
The Union carries out projects aiming at the raising of the Russian metal and steel products market as well as at strengthening of the competitive power of the members of the Union.
Welcome to visit
Booth Russian Union of Metal and Steel Suppliers 1B15
S.M.A.C. (Santino Mafessoni Aluminium Consulting) is a consulting company specialized in aluminium foundries, extrusion lines and automatic warehouse. Thanks to the expeiences collected in many years S.M.A.C. support Russian managers and companies in many other sectors such as forging and stamping presses, bending and binding machines, industrial automation lines and hydraulic components and systems.
Salico supplies finishing lines for flat metal strip including mechanical engineering, electrical equipment & automation, manufacturing, project management, erection & commissioning, and after sales services.
The production program includes slitting lines, cut to length lines, tension leveling lines, cleaning & degreasing lines as well as packaging lines, in all cases with very innovative and efficient technical solutons and a very flexible approach towards our customers. The Salico group proudly celebrates its 40th anniversary due to the continuous technological advance that marks its trajectory. Important projects carried out all over the world have led us to position ourselves at the forefront of companies in finishing lines. We must greatly appreciate thye trust that our clients have placed in us since they have been the main engine that has led to achieve our projectives. We hope to continue growing as the great family we already are and to continue envolving and developing equipemnt that meets the nheeds of our customers.
The Salico Group of companies is composed by:
- Salico Spa in Molteno (LC), Italy (mechanical engineering & construction);
- Salico Hispania SA in Madrid, Spain (mechanical engineering);
- KCS Herr Voss UK Ltd in the West Midlandes, UK (mechanical engineering);
- Sallico Automation SL in Molteno (LC), Italy (automation);
- Salmec Automation SL in Madrid, Spain (automation);
- Giuseppe Fumagalli Srl in Barzago (LC), Italy (mechanical engineering & construction);
- Salico Foil Srl, in Abbadia Lariana, Italy;
- SES Salico Llc in Alliance, Ohio, USA (mechanical engineering & construction).
Eight sites in four countries to serve our customers worldwide. Salico is your reliable supplier for the engineering, maufacturing, delivery, start up and service during the entire lifetime of your equipments.
We Work for Your Future. We deliver innovation and modern solutions for your company. We know how to do it.
Founded in 1965, and nowadays with more than 50 years' experience on international projects, SARRALLE is your partner in the iron and steel, environment, energy, water, oil and gas, and workshop equipment worlds.
SARRALLE is an innovative design, engineering, manufacturing and installation company, with more than 400 dynamic, highly-qualified and multiculturel employees and located in 8 countries, tha's why we are fast, flexible and close to you. Our unique expertise, technological capabilities and group synergies will help you to create smart ways of meeting today's challanges.
SARRALLE provides you turnkey solutions services, adapted to your needs, helping you optimize your productive processes because we want you to be the best company in your market and we work for our prior aim: your future.
We offer the best modern solutions through our 5 buisness lines:
- Steel melting shop, since 1960, designs, manufactures and provides complete turnkey solutions for steel works internationally. It is a company with extensive experience in the world of steel supported by professionals seeking constant innovation. In addition to offering EPC solutions SARRALLE offers a broad line of products.
- Rolling mill, provides engineering, procurement and construction projects with a technology development for the processing of semi-products for the diverse range of end products.
- Coil processing lines, has extensive experience in the design, construction, installation and commissioning of lines for the processing of metal coils, for the entire range currently produced by the industry. This range includes the largest coils produced, regarding the thickness (high-thick coils), weight and width.
- Engineering offers general engineering service focusing its activities in the "Waste to Energy" and "Oil and Gas" sector.
- Metallic furniture, was born in 1971 and is dedicated to the design, manufacture and commercialization of products for storage and optimization of working spaces, with the consequent rationalization of the associated costs.
SCHEUERLE is a member of the TII-Group, the world market leading manufacturer of heavy-duty vehicles equipped with hydraulically suspended pendulum axes. As a recognized specialist in heavy duty transportation, we are qualified partners worldwide for freight forwarders, construction firms, shipyards, iron and steel plants, tunnel & bridge constructors, constructors of large scale plants, ports, container terminals for the offshore as well as the aero and space industries. SCHEUERLE transporters master the special requirements of the offshore and shipyard industry with excellence. Our transporters move giant ships, submarines, or even more completely prefabricated drilling platforms. Flexibility, profitability and precision are great reasons to use SCHEUERLE transport technology.
Severstal-metiz is a group of companies which unites the metalware assets of the Severstal company. It is among the Top-5 European producers of wire and wire products in its segment. Production sites are located in Russia, Ukraine and Europe. Major customers are in construction, oil and gas, automotive, metallurgy and engineering.
The SIBRE company is one of the leading world manifacturers of brake systems and crane components, namely: working drum brakes and disk brakes, emergency disk brakes on a flange of a drum of the lifting machanism, storm or parking brakes and also couplings high-speed, barrel couplings of drum, crane wheel blocks, crane buffers, and also disk brakes in common industrial and explosion-proof execution on drivers of conveyors.
The SMS group unites global players in plant and machinery construction for processing steel and NF metals, operating under the roof of SMS Holding GmbH.
The family-owened company - now run by the fourth generation - stands out with its strong market posiiton and corporate culture of responsibility, together with high-performance products and services tailored to individual customer erquirements. The SMS group combines the flexibility of medium-sized company units with the vast resoursec of a global group.
We build on the continuous training and comprehensive experience of our employess to develop ground-breaking technologies. What's more, as a systems supplier, the SMS group also covers electrical systems, automation and service.
The SMS group is your partner for new plant and machinery as well as modernizations and upgrades.
Office in the Russian Federation:
SMS group GmbH Liaison Office Moskau
18/1, Hotel Azimut, Olimpiysky prospekt, Moscow 129110, Russia
Tel.: +7 (495) 931-98-23
Special Steels and Alloys, founded in 2000, is one of the leading Russian steel producing and trading companies. We offer more than 15000 names of production from stainless steel: seamless pipes, welded and profile pipes, fittings for food, oil and chemical industries, bars, sheets, fittings for construction, etc.
SPECTA is the largest steel and polyester strap producer in Eastern Europe. We offer modern equipment and materials for heavy-duty packing and marking of products of steel, non-ferrous and tube industries, protection against corrosion, mechanical damage and weather conditions during storage and transportation.
- Production of high tensile packaging steel strap SPECTA PRIMA, SPECTA FACTOR, SPECTA FORTE MODEX, SPECTA DELTA, SPECTA FORTE and polyester strap SPECTA BRAVA, SPECTA ALTO and SPECTA OPTIMA for manual and automatic strapping;
- Production of seals for steel and PET strap;
- Delivery of packing tools and equipment;
- Clear and resisting identification (using bar coding) and exact accounting of heavy industrial products;
- After-sales service;
- Export to over 50 countries in Europe and Asia.
SSAB is a Nordic and US-based steel company. SSAB offers value added products and services developed in close cooperation with its customers to create a stronger, lighter and more sustainable world. SSAB has employees in over 50 countries. SSAB has production facilities in Sweden, Finland and the US. SSAB is listed on the Nasdaq OMX Nordic Exchange in Stockholm and has a secondary listing on the Nasdaq OMX in Helsinki.
Stal’ journal is scientific & industrial engineering journal is a leading periodical on the matters of theory and practice of iron & steel industry of Russia and other CIS members.
Publishing house: Intermet Engineering. The subjects cover preparation of iron ore materials for processing, production of pipes & tubes, crude steel, output of rolled products, steel wire products, problems of design & engineering, higher reliability and service life of metallurgical equipment, physical metallurgy & heat treatment, new materials & processes, ecology and resource saving.
STAROFIT is a major supplier for steel, alloy steel and stainless steel elbows and buttwelding fittings from Germany. We provide high quality goods and reliable service to our customers. Our holdings range from large stock of ASME and EN/DIN standardised products to highly specialized elbows and fittings with extreme wallthicknesses and in exceptional dimensions.
The Association unites all market participants in steel construction: the leading steel manufacturers and suppliers, steel fabricators and erectors, research and design institutes, architects, high schools.
Welcome to visit
Booth Steel Construction Development Association 1A41
Steel Times International published by Quartz Business Media (UK) is an English language journal. It contains a digest of global news, events, statistics, and stockholding news, as well as more detailed technical articles, company and country profiles, conference reports and regular regional economic briefings.
6000 copies of each issue are circulated worldwide to a combination of subscribers and targeted readers. In addition to its regular eight issues a year Steel Times International publishes technical supplements and foreign language supplements in Chinese, Russian and Spanish for distribution in the appropriate regions.
If you would like to be kept informed with industry news, then remember you can visit the website: as this is updated daily with news and information. We also offer readers the opportunity to receive a free weekly newsletter. If you already receive our weekly newsletter, then you will automatically receive a free digital English language issue upon publication. However, if you don’t, then you can easily sign up through the website: www.steeltimesint.com
STEEL.LIFE is a specialized advertising and information publication for professionals in industrial supply and marketing who value time and quality.
The publication focuses on a conceptually new approach in covering the main aspects of the most important sector of the economy - the steel market.
In the magazine, you can not only read review articles on the steel market, profitably present your company, find a trusted supplier, but also get acquainted with useful advice from experts in the field of taxation and law
The company SteelPrint is the Russian manufacturer of painted coiled steel with a Printech coating using Coil Coating technology for the continuous application of paints and varnishes.
SteelPrint products have increased performance characteristics and an attractive appearance of natural materials, which makes it possible to realize the most interesting and complex projects.
SteelProm Ltd. offers consumers lifting equipment (lifting beam, clamps, various kinds of slings) which is admitted for its high quality, reliability, durability, usability and allows to solve a lot of problems associated with lifting, handling, warehousing and lashing.
Stroitelnaya Orbita — Russian trade magazine, published since 2003.
The main content is articles about the state of the construction industry, and information about the best technologies, design solutions, energy conservation, environmental issues, the state of Affairs in housing and communal services, road sector of the country.
SD Group produces information-analytical construction journal StroyPromEkspert. Circulation: 25,000 copies, size: A4, frequency: quarterly, spread to all regions of Russia.
The advantage of our publications is: complete market monitoring, real-time data, the reliability of the information provided. The magazine is available to all smartphone users, download on the AppStore and GooglePlay.
General Director — Yury N. Lebedev.
Sukhoy Log Refractory Works was founded on March 27, 1932 and now is one of the key sites of refractory industry for producing silica-alumina materials and products in Russia.
Since April 2006 there was established a joint venture on the base of Sukhoy Log Refractory Works to manufacture heat-insulating high-temperature ceramic fibre and fibre-based products.
The plant produces the following products:
- High-temperature heat-insulating materials and products;
- Products for lining of revolvers;
- Fireclay powder , chamotte filler and mortars;
- Light-weight refractory heat-insulating products with density of 1.3, 1.0, 0.4 and 0.8 (g/cm3);
- Light-weight refractory heat-insulating products according to ASTM C-155-23;26;28;30;
- Insulating castables;
- Refractory chamotte concrete products;
- Refractory silica-alumina products for cupola furnace lining;
- Ceramic firebrick;
- Heat-resistant glue.
Taurus Motors is a manufacturer of scrap lorries, cable processing machines, grabs and spare parts for hydraulic manipulators and excavators. Professional company delivers and makes a service for scrap metal processing equipment as a dealer of TAURUS, HWH Machines, PALFINGER, MISTRA, HYDRAULIKA PETRAS, QD, Mayslynn, PRIDE brands.
TechEnergoProm, Group of Company supplies a wide range of metal, raw materials and semi-finished products, production of steel structures for mining industry, city electrotransport, construction and the energy sector.
Techno Tub Co., Ltd. is a production department of Special Steels and Alloys in Kaliningrad Region, that has modern equipment for the production of stainless welded pipes with diameter from 8 to 104 mm, profile pipes with dimensions from 10 to 100 mm, with polished, mirror polished or brushed surface according to standards EN 10217-7, EN 10296-2, DIN 11850 (EN 10357), ASTM A554, ASTM A778, ASTM A312, ASTM A268, ASTM A249. We started producing elbows D 16-108 in 2016.
The industrial magazine “TEHSOVET premium” covers technologies, equipment,
materials and services applicable to various industries. It’s mission is to help companies in their search for
business partners. It is well known as a comprehensive source of highly reliable information to top executives in
major industrial companies in the Russian Ural region. We provide an excellent printing base coupled with the
variety of available ad formats and highly competitive pricing.
Tekhnostyl color is the manufacturer of high quality coiled colored steel. It is produced on the modern highly productive automatized line with Coil Coating technology. "Tekhnostyl color" is a part of "TekhnoStyl" companies, which is the biggest manufacturer on the market of building materials.
Tekno btm is a company located in the North of Italy specialized in manufacturing copper parts: forged contact plates, cooling blocks, wall water boxes, EBT water boxes, lance tips and burner injectors, cooling panels, forged ingot moulds, crucible for (P) ESR or VAR.
TEM-PO, Naberezhnye Chelny Tubes Works, JSC produces over 300 standard sizes of steel pipes, among which profile pipes of square and rectangular section; round electrowelded pipes with a diameter from 40 to 530 mm; pipes with corrosion-resistant coating. Production of the plant is used in different sectors of economy: construction, agricultural, automobile, oil and gas. Productivity of the tube works is 700 000 tons of production a year. There are certificates of GazpromSert, Rosneft and Transneft. At the moment certification according to the international API standard is conducted.
Camelot Publishing media company working at the Oil&Gas press market since 2001 offer Your kind attention scientific and technical magazines "Gas Industry", "Neftegaz Territory", "Corrosion on the Territory of Neftegaz". Reliable and professional narrative of up-to-date industrial information, the scientific importance of articles, value in expert community is characteristic of each of these magazines entering in the list of Higher Attestation Commission of the Russian Ministry of Education and Science (VAK).
Starting from 2000 Thermo Techno represent the world’s major leading manufacturers of analytical and testing equipment, provides technical and engineering services and scientific support in Russia and CIS countries.
Thermo Techno delivers and installs thickness gauges on hot and cold rolling mills, weight gauges of metalliс and paint coating lines, develops and implements complex laboratory decisions and engineer projects, giving an opportunity to maintain analytical control and to obtain compete and accurate information about technical or research process.
Thermo Techno customers are: NLMK , Magnitogorsk Iron and Stell Work, Severstal, OMK, Metalloinvest, Rusal, Norilsk Nikel, UMMC, RCC, Polymetal, and others.
TIMKO products range includes:
- Slitting lines;
- Cut-to-length lines;
- Multi-cut blanking lines;
- Press feeding lines;
- Coil packaging lines;
- ERW / saw pipe lines;
- Pipe coating lines;
- Metal forming and welding lines (cable tray, core cutting, radiator for transformer, fin folding, shelf production, trapezoid roofing, building parts, sinusoidal sherll and stiffener legs for silos etc);
- Flexible production lines:
- Custom designed special purpose equipmen.
We can offer systems that porcess coils with width up to 2500 mm, thickness up to 25 mm, weighing up to 40 tons, and also diameter up to 3000 mm (120 inches) for saw pipes.
TMK is one of the world’s leading producers of tubular products for the oil and gas industry. Since 2009 it has been ranked first in the world by volume of pipes shipped.
The Company operates 27 production sites in Russia, the U.S., Canada, Romania, Oman and Kazakhstan. TMK has the world’s largest steel pipe production capacity.
TMK plants produce almost the entire range of existing pipes used in the oil-and-gas sector, the chemical and petrochemical industries, energy and machine-building, construction and municipal housing, shipbuilding, aviation and aerospace, and agriculture. TMK delivers its products along with an extensive package of services in heat treating, protective coating, premium connections threading, warehousing and pipe repairing.
TMK’s clients include leading oil and gas companies, such as Shell, ENI, Total, ExxonMobil, Occidental Petroleum, ONGC, Saudi Aramco, Anadarko, Marathon, Rosneft, Surgutneftegaz, Gazprom, Transneft, Lukoil and other global oil and gas companies.
The Company’s major presence in the global market is secured by the extensive sales network that covers virtually all main global oil and gas production regions: the U.S., Canada, Russia and the CIS, Europe, the Middle East, North and Sub-Saharan Africa and South-East Asia. TMK supplies products to more than 80 countries worldwide.
For more than one hundred years, the names Dango & Dienenthal and Paul Wurth have been renowned for robust and reliable taphole technology. The joint venture company TMT combines the experience of both DDS and PW to contribute to the creation of taphole technology for the future.
We deliver the following products:
- Ferrosilicon manganese FeMnSi18Lp;
- Calcium carbide;
- Ferrosilicium 45, 65, 75;
- Manganese concentrate;
- Chrome concentrate.
We have sales offices in Moscow and Chelyabinsk and 5 warehouse terminals for processing and storage of products.
Moscow office: room 207, 2/4, 3A, Luzhnetskaya nab., Moscow 119270, Russia.
- Seamless centrifugally cast tubes with diameter range 100-1625mm, wall thickness range 7-250mm length up to 6250mm; of any steel and iron grades; with machining and heat treatment.
- Products made of centrifugally cast tubes: drums of the metal HD galvanizing lines, child mould, rolls, rollers, guides of presses, machines, manipulators, flanges, rings, tires, gear blanks, bushings, bodies of bearings, valves, pumps and hydraulic cylinders, moulds.
- Bimetallic centrifugally cast tubes of over 35 combinations for pulp feed-lines, bushings for slush pumps, rolls of continuous-casting machines, corrosion resistant lines.
- Radiant tubes, high-temperature muffles, retorts and baskets , tubes for high temperature installations including wear-resistant.
- Pipe-lines and vessels for aggressive liquids.
- Pillars and columns of heavy-loaded constructions.
- Pipe-lines components (elbows, reduces, T-joint, flanges, etc.) with diameter range 22-1420mm of any steel grades including bimetallic and welded ones (according to GOST, DIN, ASTM.)
- Seamless cold-strained pipes.
The principal directions of the Institute developments are as follows: fundamental and applied studies as well as scientific-research, experimental-design, technological and reconnaissance works in the area of metallurgical technology, new materials and ferrous metallurgy economics.
Development of special purpose alloys and new products from non-ferrous metals and alloys (bands, rods, wire). Developing of technological processes of production of non-ferrous metals and alloys drawn and rolled products. Engineering and manufacturing of technological equipment for non-ferrous metals processing.
UMMC-Non-ferrous Metals Processing LLC (UMMC-NFMP) – the leading Russian enterprise in non-ferrous metals processing industry. UMMC-NFMP, the division of the Ural Mining & Metallurgical Company, currently is a managing company for Kirov Non-ferrous Metals Processing and Revda Non- ferrous Metals Processing plants. In addition to the products of the mentioned plants UMMC-NFMP supplies products of Copper Tube Plant, Majdanpek (Fabrika Bakarnih Cevi Majdanpek, Serbia). Our plants manufacture copper, brass, bronze, copper-nickel, nickel rolled products: tubes up to 300mm, including copper tubes for water, heating, air conditioning and refrigeration equipment (HVACR); flat products up to 1000mm wide, including copper roofing strips, buses, rods, profiles, wires, foils, cable lugs and sleeves, components.
UMMC-Steel is the management company of metallurgical and mining enterprises: Nadezhdinski Metallurgical Plant in Serov city, Elektrostal of Tyumen in Tyumen city, Bogoslovskoye Mine Group and scrap collection complexes.
The company's enterprises produce a wide range of products:
- long products (hot rolled round steel bars, square bars, hexagon, reinforcing steel);
- calibrated rolling (round, hexagon);
- special surface finish steel;
- steel billets (axial, square, round).
- cast iron
- iron-ore concentrate
UMMC-Steel offers beneficial cooperation conditions and a convenient delivery:
> Quality according to GOSTs, TU;
> Flexible system of order volume discounts;
> Fast shipment of low-tonnage batches of any picking;
> The minimum tonnage for any order is 1 ton of rolled metal;
> Sales from stock.
Urals Pipe Works, JSC produces:
- Round pipes according to GOST 10705, 20295, API 5L, API 5CT, ASTM A53, EN 10219, EN 10217, DIN EN ISO 3183, d 114-630 mm wall thickness 3-22mm;
- Hollow sections according to GOST 30245, 25577, EN 10219, 80x80 up to 500x500 mm, wall thickness 3-22 mm;
- Casing pipes API 5CT, ISO 11960, GOST Р 53366, d 146,1-323,9 mm, wall thickness 6,5-16,5 mm;
- Electric welded I-beam;
- Channel bar;
- Cold formed angles;
- C-shaped sections;
- Metal structures;
- Quick raised buildings of complete delivery (collapsible buildings, multi purpose buildings of complete delivery);
- Steel windows, doors, gates;
- Wall and roof panels;
- Road and bridge fences.
UVB TECHNIK s.r.o. has been engaged in the development and production of measuring instruments and technological equipment. The key products are accurate continuous contact thickness gauges, strip profile gauges, wiping equipments and foil thickness gauge.
Vernet Behringer together with our German affiliate company Behringer GmbH, and within the Partners for Steel (P4S) alliance is the only premium company offering a wide spectrum of production lines exclusively dedicated to structuresl steel fabrication, steel stock holders, and transmission tower specialists. Our ranger of CNC machines covers all the crossed combinations of punching, drilling, sawing, marking, plasma/oxy cutting... for any type of steel profiles, angles and paltes. Vernet Behringer is also innovating in full automatic lines that can work without any operator.
VI-MENS — high-quality Ltd. — band saw VI-MENS, band saw WIKUS (Germany), band sawing machines MEBA (Germany), unit-type metal construction lines and technologies Peddinghaus (USA), machinery for processing valves STEMA/PEDAX (Denmark/Germany).
The unique issue in the country, which specialized on the scrap branch devoted to problems, scientific development and technologies, economy and legislative maintenance of the market of grab iron and wastes of ferrous and non-ferrous metals. It is distributed in all regions of Russia, countries of CIS, provides in administration of President of Russian Federation, Gosduma of Russian Federation, on metallurgical centres and firms engaged in processing of a grab iron. It participates in all profile exhibitions, scientific - practical conferences and seminars.
The magazine is fullcolour, circulation 5 000 copies, 54 strips. Periodicity: 1 number per 2 months.
Wepuko Pahnke is a German mechanical and systems engineering company, specialized in the design and manufacturing of high-pressure pumps and hydraulic forging presses, including their drives and controls. Furthermore, the company offers complete descaling systems.
CIE is a comprehensive international engineering company integrated with project financing, EPC project contracting, project management, engineering consultation, geotechnical engineering investigation and surveying, engineering design, technology research and development and technical equipment manufacturing. CIE’s business involves many fields like metallurgy, mining, mineral processing, sintering, pelletizing, direct reduction, municipal engineering, civil architecture, environmental engineering, supervision. CIE’s product and service not only cover domestic projects, they have also been exported to foreign countries like Brazil, India, Saudi Arabia, Indonesia, Japan and Australia etc., and it has won a good reputation for its excellent products and outstanding services.
Welcome to visit
Booth Zhongye Changtian International Engineering 2B04
- Tube mill lines for production electro-welded round, square and rectangular tubes with max. dimensions 300x300x10 mm using special non rolls changing technology;
- All types open profiles incl. roof profiles 8-160 mm, C/Z/V & , Sigma, KNAUF, TROCAL, steel poles for grape fields and fruit gardens etc.;
- Automatic coils slitting and cut-to-length lines for materilas thicknesses 0,15-12 mm;
- Levelers: 0,5-32 mm;
- Press feeders;
- Coils decoiler and recoiler machines.